Single pulse energy up to 100μJ
RealSubns® MCJ Series 1ns Microchip Laser
PRODUCT PARAMETERS
| Optical Parameters | |||||
| Wavelength (nm) | 1030 | 515 | 343 | 257 | |
| Repetition rate (kHz) | 1 | 1 | 1* | 1* | |
| Average power (mW) | 100 | 40 | 20 | 8 | |
| Pulse energy (μJ) | 100 | 40 | 20 | 8 | |
| Pulse width (ps) | 1000 | 900 | 800 | 800 | |
| Power stability (RMS, @8h) | <3% | ||||
| Beam profile | TEM00 | ||||
| Beam full divergence (typ., mrad) | Horizontal @1/e² | 6 | 4 | 3 | 2 |
| Vertical @1/e² | 6 | 4 | 3 | 2 | |
| Polarization ratio | >100:1 | ||||
| System Parameters | |||||
| Supply power voltage | 100~240 VAC, 50/60 Hz | ||||
| Control interface | RS232,USB | ||||
| Power consumption (W) | ≤45 | ||||
| Power dimensions (W×H×L,mm) | 180×102×180 | ||||
| Laser head dimensions (W×H×L,mm) | 45×33×120 | ||||
| Operation temperature (℃) | 15~35 | ||||
| Storage temperature (℃) | 0~60 | ||||
1. *Side laser outlet configuration（middle laser outlet configuration unless otherwise stated）.
2. Built-in beam expander and collimator are available upon request, and divergence can be less than 2mrad.
3. All the data in the above table are the typical values obtained from the tests at room temperature of 25℃, and the final data is subject to the final test report.
APPLICATION
-
Material micromachining
- Spectrum analysis
- LIDAR
- Pump source
- Biomedicine
KEY FEATURES
-
Pulse width down to 1ns
/ - /
- Repetition rate up to 2kHz/
- Spatial mode TEM00/
RECOMMENDED PRODUCTS
-
Microchip LasersMCA Series 1.5ns Microchip Laser1064nm, 532nm, 355nm and 266nm;
1-20KHz, 2-120μJ, 1200-2000ps - Microchip LasersMCC Series 750ps Microchip Laser1064nm, 532nm, 355nm, 266nm and 213nm;
1-10KHz, 4-100μJ, 650-750ps - Microchip LasersMCI Series 2.5ns Microchip Laser946nm and 473nm;
1KHz, 4-20μJ, 2000-2500ps
777 