MCL Series 2.5ns Microchip Laser

MCL series microchip lasers are RealLight’s self-developed, passively Q-switched diode-pumped solid-state lasers, featuring stable single pulse energy, excellent beam quality and high reliability. The integrated design of diode-pumped module and laser crystal brings convenience to installation and integration due to the compact size. MCL series provides various wavelengths include 1319nm and 660nm, and supports internal and external triggering. The internal hermetic module of the laser head is available to customers for tailor-made development.

Datasheets E-mail Message

PRODUCT PARAMETERS

Optical Parameters
Wavelength (nm)		1319	660
Repetition rate (kHz)		1*	1*
Average power (mW)		50	10
Pulse energy (μJ)		50	10
Pulse width (ps)		2500	2000
Power stability (RMS, @8h)		<3%
Beam profile		TEM00
Beam full divergence (typ., mrad)	Horizontal @1/e²	10	6
	Vertical @1/e²	10	6
Polarization ratio		>100:1
System Parameters
Supply power voltage		100~240 VAC, 50/60 Hz
Control interface		RS232, USB
Power consumption (W)		≤45	≤45
Power dimensions (W×H×L,mm)		180×102×180
Laser head dimensions (W×H×L,mm)		45×33×120
Operation temperature (℃)		15~35
Storage temperature (℃)		0~60

1. *Side laser outlet configuration（middle laser outlet configuration unless otherwise stated）.
2. Built-in beam expander and collimator are available upon request, and divergence can be less than 2mrad.
3. All the data in the above table are the typical values obtained from the tests at room temperature of 25℃, and the final data is subject to the final test report.

APPLICATION

Photodynamic therapy
Environmental monitoring
Laser remote sensing
LIDAR
Spectroscopy
Laser display

KEY FEATURES

Pulse width down to 2.5ns

/
Single pulse energy up to 50μJ

/
Repetition rate up to 1kHz

/
Spatial mode TEM00

/
Sealed package, high reliability

/
Polarization-stable

/