2400W Conduction Cooled QCW Diode Side-Pumped Module

Product Introduction of 2400W Conduction-Cooled Quasi-Continuous Diode Side-Pump Module
The 2400W conduction-cooled quasi-continuous diode side-pump module is a high-power laser pump product launched by Beijing Real-Light Technology Co., Ltd. Centered on self-developed PA-1 series polygonal conduction-cooled arrays and heat sink welded laser crystals as core components, it adopts a water-free conduction cooling design without complicated water cooling auxiliary equipment. Capable of adapting to all kinds of harsh operating environments while realizing miniaturized high peak power pumping, it delivers outstanding beam quality, low thermal effect and high operational stability, serving as a core supporting light source for solid-state lasers under special operating conditions such as airborne and vehicle-mounted scenarios.

Core Product Advantages and Features
Centered on three key indicators including environmental adaptability, pumping performance and operational reliability, this module boasts outstanding comprehensive performance to meet the long-term operation demands of special laser equipment:
1.Superior environmental adaptability
The module features excellent wide-temperature operating performance and runs stably under complex high and low temperature conditions, resisting temperature fluctuations in outdoor and mobile carrier scenarios. It is applicable to field and special operation scenarios such as aviation and vehicle-mounted equipment.
2.Uniform pump absorption
Benefiting from mature optical structure design and array layout, it outputs uniform laser light, enabling laser crystals to absorb pump light sufficiently and evenly. This effectively improves the overall electro-optical conversion efficiency and guarantees the output quality of the complete laser system.
3.High stability and reliability with low thermal effect
Optimized core components and heat dissipation structures reduce heat accumulation and slight thermal deformation during operation. Its performance barely degrades under long-term quasi-continuous operation, featuring low failure rate and long service life.
4.Compact structure for easy integration
Abandoning the traditional water cooling structure, the module features a small overall size and simplified equipment layout. It can be easily embedded into various miniaturized and integrated laser systems to lower the difficulty of overall layout and installation.

Technical Specifications
This product is available in two power ratings: 1800W and 2400W. All parameters are typical values measured at 60°C. The final specifications shall be subject to factory test reports. Customization of crystal rod wedge angle, temperature-controlled wavelength, laser bars with different power ratings and other items is supported.
The standard pump wavelength is 808±3 nm with spectral width no more than 5 nm. The peak pump power of the two models is 1800W and 2400W respectively. Both adopt Nd:YAG laser crystals equipped with 2 crystal rods sized Φ4×20 mm and Φ5×20 mm correspondingly, matched with 18 and 24 laser bars respectively. Electrically, the operating current of both models is less than 110 A, while their operating voltage is below 36 V and 48 V separately. Working in quasi-continuous wave (QCW) mode, the maximum duty cycle is ≤0.6%, the maximum pulse width is 300 μs, and the maximum repetition frequency is no higher than 20 Hz. In terms of environmental resistance, the normal operating temperature range is -40°C ~ 65°C, and the storage temperature range reaches -45°C ~ 80°C, allowing long-term storage and operation under extreme temperature environments.

Main Application Fields
1.Radar ranging
As a matched laser emission light source for ranging radars, its high peak power and stable output ensure ranging accuracy and detection distance, compatible with all types of radar ranging systems.
2.Target illumination
It is used for long-distance target fill light and scene illumination in special scenarios. Uniform beam output meets visual observation and detection requirements at night and in complex environments.
3.Aerospace applications
With water-free cooling, wide temperature tolerance and high reliability, it can be applied to laser systems in aviation, aerospace and other space fields, acting as the preferred pump source for space laser equipment.

Product Customization and Service Instructions
We provide comprehensive customization services. We can adjust the crystal rod wedge angle, customize special temperature-controlled wavelengths, and replace laser bars with different packaging power levels to match diversified system design schemes.
All products undergo strict inspection procedures before delivery, and each unit is delivered with a complete factory test report to ensure all parameters meet standards and consistent performance.
Backed by the company’s complete R&D, production and after-sales service system, we provide full-process technical support including product selection, structural integration and working condition commissioning.